Add a Hiking Board to the Goat Island Skiff

Last year I built the „UnterSeeBoot“ and had some nice hours riding on the edge but the longer I ride the harder it was to ignore the signals of the lower part of my body… so this year I decided to do something for my 51 ear old butt… here it is. It’s made from 10mm marine grade ply and cedro. To initiate the forces to the hull I add two frames between bulkhead one and two and two vertikal knees below the deck at the frame positions. All joints made with epoxy. I add a peace of harder mahogany where I later glued in the oarlocks. The mod adds about 2,3kg of weight, thats worth of it (my butt’s opinion…).

Here you find a lot of photos about the process

My „Drawing“:

Preparing the boards

The board is about 150mm wide and 850mm long

Preparing Frames and Knees

Glueing and Paintwork

Sailing…

From now: Sailing without pain!

Print Friendly, PDF & Email

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.